background image

GB-4

D

GB

F

NL

I

E

Contact

If you have any technical questions, please contact 
your local branch office/agent. The addresses are 
available on the Internet or from Elster GmbH.

We reserve the right to make technical modifications 

in the interests of progress.

Elster GmbH

Strotheweg 1, D-49504 Lotte (Büren)

Tel. +49 541 1214-0

Fax +49 541 1214-370

[email protected], www.kromschroeder.com

Contact

Designed lifetime

This information on the designed lifetime is based on 

using the product in accordance with these operating 
instructions. Once the designed lifetime has been 
reached, safety-relevant products must be replaced.
Designed lifetime (based on date of manufacture) 
in accordance with EN 13611 for GFK: 10 years.

You can find further explanations in the applicable 

rules and regulations and on the afecor website 
(www.afecor.org).

This procedure applies to heating systems. For 

thermoprocessing equipment, observe local regu-
lations.

Logistics

Transport

Protect the unit from external forces (blows, shocks, 
vibration). On receipt of the product, check that the 
delivery is complete, see page  2 (Part designa-
tions). Report any transport damage immediately.

Storage

Store the product in a dry and clean place.
Storage temperature: see page 3 (Technical data). 
Storage time: 6 months before using for the first 
time. If stored for longer than this, the overall service 
life will be reduced by the corresponding amount of 
extra storage time.

Packaging

The packaging material is to be disposed of in ac-

cordance with local regulations.

Disposal

Components are to be disposed of separately in 

accordance with local regulations.

Certification

Declaration of conformity

We, the manufacturer, hereby declare that the prod-

uct GFK, marked with product ID No. 0063AU1408, 
complies with the essential requirements of the fol-
lowing Directives and Standards:

Directives:

– 

2009/142/EC – GAD (valid until 20 April 2018)

– 2014/68/EU

Regulation:

– 

(EU) 2016/426 – GAR (valid from 21 April 2018)

The relevant product corresponds to the tested type 

sample.

The production is subject to the surveillance proce-

dure pursuant to Directive 2009/142/EC Annex II 
paragraph 3 (valid until 20 April 2018) and to Regula-
tion (EU) 2016/426 Annex III paragraph 3 (valid from 
21 April 2018).
Elster GmbH

Scan of the Declaration of conformity (D, GB) – see 
www.docuthek.com

Filter pads

With 50 µm separation rate

Designation

Order No.

Spare parts set GFK 15/20, 

10 filter pads and 10 O-rings

71935010

Spare parts set GFK 25/32, 

10 filter pads and 10 O-rings

71937010

Spare parts set GFK 40/50, 
5 filter pads and 5 O-rings

71939010

Spare parts set GFK 65, 

1 filter pad and 1 O-ring

74923284

Spare parts set GFK 80, 

1 filter pad and 1 O-ring

74923285

Spare parts set GFK 100, 

1 filter pad and 1 O-ring

74923286

Filter pad GFK 125

35448581

O-ring 308x8 for GFK 125/150

03110013

Filter pad GFK 150

35448583

O-ring 308x8 for GFK 125/150

03110013

Filter pad GFK 200/250

35448584

O-ring 430x8 for GFK 200/250

03109164

 

Filter pads with special separation rate of 10 µm 
for GFK 15 – 100 on request.

Summary of Contents for GFK Series

Page 1: ...nstructions as follows DANGER Indicates potentially fatal situations WARNING Indicates possible danger to life and limb CAUTION Indicates possible material damage All interventions may only be carried out by qualified gas technicians Electrical interventions may only be carried out by qualified electricians Conversion spare parts All technical changes are prohibited Only use OEM spare parts Change...

Page 2: ...outlet Part designations GFK F GFK R 1 1 3 2 2 1 Housing cover 2 Lower housing section 3 Pressure test point Type label Max inlet pressure see type label D 49018 Osnabrück Germany GFK pu max Installation CAUTION Dropping the device can cause permanent dam age In this event replace the entire device and associated modules before use Installation position any in horizontal or verti cal pipework reco...

Page 3: ...FK 40 8 GFK 50 8 GFK 65 8 GFK 80 20 GFK 100 20 GFK 125 60 GFK 150 60 GFK 200 80 GFK 250 80 Checking tightness and function When replacing the filter pad the gas filled space in the GFK is opened Therefore check for tight ness once the filter pad has been reinstalled 12 To be able to check the tightness shut off the downstream pipeline close to the gas filter 1 2 x pu max N2 14 13 15 Tightness OK o...

Page 4: ...xtra storage time Packaging The packaging material is to be disposed of in ac cordance with local regulations Disposal Components are to be disposed of separately in accordance with local regulations Certification Declaration of conformity We the manufacturer hereby declare that the prod uct GFK marked with product ID No 0063AU1408 complies with the essential requirements of the fol lowing Directi...

Reviews: