SAFETY INSTRUCTIONS
1
3
SMARTPAT COND 5200
www.krohne.com
03/2022 - 4004007703 - MA SMARTPAT COND 5200 R03 en
1.1 General notes
This additional Ex instruction applies to explosion-protected versions of the sensors with the
marking II 1 G. It completes the standard documentation for non-explosion protected versions.
The information given in these instructions contains only the data relevant to explosion
protection. The technical details given in the standard documentation for the non-explosion
protected versions remain unchanged unless they will be excluded or replaced by this
instruction.
1.2 EU conformity
The manufacturer declares with the EC declaration of conformity on his own responsibility
conformity with the protection goals of directive 2014/34/EU for use in hazardous areas with gas.
Conformity with harmonised standards was checked by a notified body in accordance with
EN IEC 60079-0:2018 and EN 60079-11:2012.
The EC declaration of conformity is based on the EC type examination certificate
You can download the EC type examination certificate from the manufacturer's website.
1.3 Approval according to the IECEx scheme
Conformity with IECEx standards was tested in accordance with the IECEx Certification Scheme
for Explosive Atmospheres acc. to IEC 60079-0:2018 and IEC 60079-11:2012 . The number of the
IECEx certificate is:
You can download the IECEx certificate from the official IECEx website www.iecex.com or from
the manufacturer's website.
KIWA 14ATEX0002 X
IECEx KIWA 14.0004X
