INSTALLATION
3
15
OPTIBAR 5060
www.krohne.com
04/2021 - 4005260702 - AD OPTIBAR 5060 Exta R02 en
3.1 Mounting
Mounting and setup must be carried out according to the applicable installation standards
(e.g. EN 60079-14 or IEC 60079-14) by qualified personnel trained in explosion protection.
The information given in the manuals and the supplementary instructions must be observed at
all times.
Install pressure transmitters so that:
•
the device is not in a pneumatic flow.
•
there is no danger from mechanical impact effects.
CAUTION!
The manufacturer is not liable for any damage resulting from improper use or use other than the
intended purpose. This applies in particular to hazards due to insufficient corrosion resistance
and suitability of the materials in contact with product.
