SAFETY INSTRUCTIONS
1
3
H250 M40 ESK4
www.krohne.com
03/2014 - 4002251801 - AD H250/M40 PROFIBUS R01 en
Safety instructions
1.1 Installation
If the ESK4 Device Description is not already installed on the PDM System a so called Device
Install ESK4 PROFIBUS-PA PDM is needed (available as download from KROHNE
‘
Download
Center
’
on the internet or on CD-ROM from KROHNE). For installing the DD with the Device
Install refer to the
“
PDM Manual
”
section:
”
Integrating Devices
”
. Please read also the
“
readme.txt
”
, which is also contained in the Device Install.
1.2 Scope of the document
These instructions are supplementary to the standard product documentation of the signal
converter. The details described herein, in particular the safety information, are valid and shall
be adhered to. The present supplementary instructions provide additional information for the
device when it is connected to a PROFIBUS network.
1.3 Scope of delivery
A device for PROFIBUS communication is supplied with:
Supplementary instructions for the PROFIBUS PA interface (this document)
INFORMATION!
The information in this document only contains the data applicable to the PROFIBUS module.
The technical data in the signal converter Handbook is valid in its current version, provided that it
is not rendered invalid or replaced by these supplementary instructions.
AD_H250_M40_PB_PA_R01_en_4002251801_PRT.book Page 3 Friday, March 21, 2014 1:14 PM
