USER’S MANUAL
18
Chapter 6 OPERATION
Only skilled and having been trained personnel is allowed to perform the
operations. Check proceedings as following.
Operation Notices:
-Clear obstacles around the lift before operation.
-During lifting or lowering, no person is allowed to stand near the two sides and
beneath the machine, and no person is allowed on the two platforms.
-Avoid to lifting over weight vehicles or other goods.
-When lifting vehicle, the chassis of the vehicle should be filled up with rubber
cushion.
-Pay attention to the synchronization of the lifting and lowering. If any abnormal is
found, stop the machine timely, check and remove the trouble.
-When the equipment is not used for a long time or overnight, the machine should be
lowered to the lowest position on ground, and remove vehicle, then cut off power
supply.
Instructions on electric operation: (see the operation panel)
LIFTING:
-Press ‘
UP
’ button on power unit, the oil pump will work immediately.
Hydraulic oil is sent to hydraulic cylinder, and the platforms are being lifted.
-Release ‘
UP
’ button, the oil pump will stop immediately. The platforms stop lifting.
DESCENT:
-Press the lever at the power unit, and the platforms descend.
-Release the lever, platforms stop descending.
Chapter 7 MAINTENANCE AND CARE
S
killed personnel only are allowed to perform the operations.
-All bearings and hinges on this machine must be lubricated once a week by
using an oilier.
-The upper and lower sliding blocks and other movable parts must be lubricated once
o month.
-The hydraulic oil must be replaced one time each year. The oil level should always be
kept at upper limit position.
