USER’S MANUAL
14
Chapter 4 INSTALLATION
SKILLED AND AUTHORIZED PERSONNEL ONLY SHOULD BE
ALLOWED TO PERFORM THESE OPERATIONS, FOLLOW ALL
INSTRUCTIONS SHOWN BELOW CAREFULLY, IN ORDER TO PREVENT
POSSIBLE DAMAGE TO THE CAR LIFT OR RISK OF INJURY TO PEOPLE.
Skilled technicians only appointed by the same manufacturer or by authorized dealers,
are allowed to install the car lift.
INSTALLATION REQUIREMENTS
l
The car lift must be installed according to the specified safety distances from walls,
pole and what other equipments stated. (Picture 14)
l
The specified safety distances from walls must be 1000 mm at least, taking into
consideration the necessary space to work easily. Because space for the control
site and for possible runways in case of emergency is also necessary.
l
The room must be previously arranged for the power supply and pneumatic feed
of the car lift.
l
The room must be 4000 mm in height, at least.
l
The car lift can be placed on any floor, as long as it is perfectly level and
sufficiently resistant. (≥250 kg/ cm², the thickness of concrete ≥ 150 mm)
Picture 14
l
All parts of the machine must be uniformly lit with sufficient light to make sure that
the adjustment and maintenance operations can be performed safely, and without
reflected light, glare that could give rise to eye fatigue.
l
The integrality of arrived goods should be checked before the lift is installed.
l
Moving and installing lift should follow the process as the picture instructs.
The transport and storage of machine refers to “TRANSPORT AND STORAGE”
on page 4.
