36
Adjusting
upper
tolerance limit (10,10mm)
2x short
Selecting the relevant digit
1x short
Increasing the digit
1x long
For confirming and saving
Afterwards you will return to the SETUP - Menu.
2x short
Quitting the SETUP – Menu
1x long
For confirming and saving.
The instrument returns to the last program used
„
ERR 06
“ in the display could be caused by the following:
Tolerance limit is out of the acceptable range
The lower tolerance limit is above the upper tolerance limit.
The upper tolerance limit is below the lower tolerance limit.
Program: TOL
