INSTRUCTION MANUAL
OF SIL STE SERIES DRIVERS
Down
Program
Up
SIL STE type drives are equipped with electronic limit switches with obstacle detection that works when
the roller shutter opens and closes.
Adjustment
button
Press the button on the motor
head and the switch key
simultaneously to set the
up or down end positions.
Setting the end position with the switch or the programming cable
2. TECHNICAL SPECIFICATIONS
Setting the end positions with the
programming wire. After setting
the position, connect the drive to
the power supply and the roller
shutter switch.
Adjustment button
Down
Program
Up
Up
Stop
Down
Adjustment
button
1. CIRCUIT INSTALLATION
IMPORTANT
e white wire must be
connected to the neutral wire.
Connecting the switch after setting
the end positions.
Programming wire
Biały = Do programatora*
* e white wire must be connected only for programming the end positions
(using an assembly wire).
Przewód montażowy
do napędów SIL STE
Niebieski = Neutralny
Czarny = Kierunek 2
Brązowy = Kierunek 1
Żółto/zielony = Ochronny
Programming wire
Protection
Protection
Neutral
Direction 2
Direction 1
Phase wire
Neutral
Protection
Direction 2
Direction 1
Protection
230v/50Hz
Voltage
Phase wire
Neutral
230v/50Hz
EN
