KRESS MISSION KR133E, Owner'S Manual

Page: 8 / 144

8
EN
1. Ultrasonic sensor 12. Battery Pack*
2. Charging Strips
13. Handle
3. Rear Driving Wheel 14. Cutting Blade
4. Rain Sensor 15. Charging pile
5. STOP Button 16. Contact Pins
6. Display 17. Charging Base
7. Keypad 18. Power Adapter
8. ON/OFF key
DISABLING DEVICE
Prevents operation of Kress
19. Charging Base Fixing Nails
9. START key 20. Boundary Wire Distance Gauge
10. Front Wheel
21.
Hex Key
11. Blade Turning Disc
*Not all the accessories illustrated or described are included in standard delivery.
Technical Data For Mower
Type KR133E KR136E (100-199 - designation of machinery, representative of Robotic Lawnmower)
KR133E KR136E
Rated voltage
20V Max.*
No load speed 2800/min
3200/min
Cutting area
Rec. / max. area performance:
3000 m
2
/ 4400 m
2
Rec. / max. area performance:
6000 m
2
/ 6500 m
2
Cutting diameter 35 cm
Cutting height 30-60 mm
Cutting high steps 5 mm
Battery type Lithium-ion
Battery model KA3006 KA3010
Charging time approx. 46 min. 77 min.
Charger model KA3717 / KA3817
Charger rating
Input: 100-240V~50/60Hz, 90W,
Output: 20V, 7.0A
Machinery weight 19 kg 19.5 kg
Protection degree III
App(Wi-Fi/Bluetooth) Y
Frequency band of embedded WLAN
module
2.412GHz-2.484GHz
Maximum slope within the work surface 35%
Max. radio-frequency power of
embedded WLAN module
802.11b:+16±2dBm(@11Mbps)
802.11g:+14±2dBm(@54Mbps)
802.11n:+13±2dBm(@HT20,MCS7)
* Voltage measured at no load. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.