KRESS MISSION KR133E, Owner'S Manual

Page: 15 / 144

15
EN
Mission
TM
does not
give an alarm when
it is outside the Geo
fence.
The software of Mission
TM
itself is not
the latest.
Update the software of the Mission
TM
before
using the GeoTrace.
There is a small tolerance area
immediately outside the perimeter
set for GeoTrace.
Bring Mission
TM
outside of the tolerance area
(approximately 30m from the Geo fence) to
verify that GeoTrace is working.
The GeoTrace is powered off.
Turn on Mission
TM
and if necessary recharge
it. If it doesn't need to be recharged, Find My
Mission
TM
GeoTrace will be recharged by the
Mission
TM
battery.
(GeoTrace has an inner battery that lasts a
week after the machine is turned off).
Geo Fence is not set, or radius of
Geo Fence is not set.
Use the Mission
TM
App to set it properly.
Mission
TM
is powered off.
In this case, the alarm will be sent 10mins
after the Mission
TM
is brought outside of the
Geo fence.
Mission
TM
still works
when it is outside the
Geo fence.
Geo Fence is not set, or radius of
Geo Fence is not set.
Use the Mission
TM
App to set it properly.
Geo Fence is not enabled.
Mission
TM
works
normally but the
communication
between Mission
TM
and smartphone
does not work
properly.
The cellular network coverage of
GeoTrace is weak.
Check if it has a weak signal. If yes move to
an area with a good signal.
The GeoTrace is damaged. Contact a dealer and get it checked properly.
The software of Mission
TM
is not the
latest.
Update the software of Mission
TM
.
The Mission
TM
App needs to be
updated.
Update your Mission
TM
App before using the
GeoTrace.
The SIM of the GeoTrace is not
activated.
Before first use, make sure you have activated
the SIM by following the procedure in the App.
The GeoTrace is not well connected
to Mission
TM
Contacting dealer. Check that the GeoTrace
connector is correctly inserted with a click.
Mission
TM
has no power.
Check if the screen of Mission
TM
is
illuminated. If not, send Mission
TM
back
to the charging base for charging or start
emergency procedure to charge it.
The SIM subscription fee has
expired.
Once expired it must be renewed.
Mission
TM
is unable
to achieve real time
positioning or the
location of Mission
TM
cannot be updated in
real-time.
The GeoTrace is designed to update the
positioning every 10 minutes for power
economy. When Mission
TM
has low
power battery capacity, the time interval
of positioning update will be longer.
This is normal. No action is needed.
If Mission
TM
has been switched off for
more than 24 hours in the Geo fence
for storage, the GeoTrace is auto
powered off with no GPS signal.
NOTE:
1. The battery of GeoTrace must be replaced by the service agent.
2. Make sure Mission
TM
is regularly charged during storage, once every half year is recommended.
3. The GeoTrace needs be renewed once SIM subscription fee expired.
Environmental protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.