KRESS KI200, Manual

Page: 13 / 200

13
EN
Press 3 times, the symbol
appears on the screen. Take the first
measurement by referring to the blinking side
(as shown in the figure above, aiming at the
top point), and the measured value will be
displayed as value 2; keep the instrument
level which performs horizontal measurement
by default; take the second measurement
by referring to the blinking side (as shown in
the figure above, aiming at the bottom point),
and the measured value will be displayed as
value 3.
The calculated height is displayed in the
summary line.
1. The first measurement/hypotenuse
2. The second
measurement/right-angle side
3. The caculated distance of another
right-angle side
Indirect measurement: Pythagorean
method three points
As shown in the figure below, measure the
height or width of a building, or when a height
needs to be determined by three distances,
it can be achieved by using Pythagorean
method three points indirect measurement.
1
2
3
Press 4 times, the symbol
appears on the screen. Take the first
measurement by referring to the blinking side
(as shown in the figure above, aiming at the