KRESS KI200, Manual

Page: 11 / 200

11
EN
2. Continuous measurement (Max/Min)
Press
button to activate continuous
measurement. The continuous
measurement symbol is shown on the
screen. At the same time, the maximum and
minimum distances measured are shown in
the display. Users can press
or to
stop the function.
*This function will be stopped automatically
after 5 minutes of inactivity.
min.
max.
3. Area measurement
Press
once, the symbol
appears in the display. Press to
take the first distance measurement (e.g.
length). Press
again to take the second
distance measurement (e.g. width). After the
second measurement, the results of area/
perimeter are shown in the main display.
1. The first measurement
2. The second measurement
3. Perimeter
4. Area
4. Volume measurement
Press
twice, the symbol appears
in the display. Press to take the first
distance measurement (e.g. length).
Press
again to take the second distance
measurement (e.g. width), and press to
take the third distance measurement (e.g.
height).
After three measurements, the result of
volume is automatically shown in the
summary line.