English 13
Do not overreach. Keep
proper footing and balance at
all times.
This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of these devices can reduce dust related hazards.
Secure the working part! Use holding
fixtures or a vice to hold the working part
steady. This is safer than holding it in your
hand and also leaves you both arms free to
operate the machine.
Power tool use and care
Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
Do not use the power tool if the switch does not turn
on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce
the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate
the power tool.
Power tools are dangerous in the
hands of untrained users.
Maintain power tools.
Check for misalignment or
binding of moving parts, breakage
of parts and any other condition that
may affect the power tools operation.
If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
Check plug and power cable regularly and
have them repaired at an authorized service
depot if damaged. Extension cables must
also be checked at regular intervals and
replaced if damaged.
Any tools not in use must be locked away
safely somewhere drey out of the reach of
children.
When drilling or screwing in walls, make
sure there is no danger of hitting hidden
power, water or gas supply lines.
Battery tool use and care
Ensure the switch is in the off position before
inserting battery pack.
Inserting the battery pack into power tools
that have the switch on invites accidents.
Recharge only with the charger specified
by the manufacturer.
A charger that is suitable for one type
of battery pack may create a risk
of fire when used with
another battery pack.
