Krautzberger RA 5, Operating Instructions Manual

Page: 37 / 53

9. After assembly, check the tight fit of all parts.
10. Check moving parts to make sure they run easily.
8.6 Changing the needle seals
Removing the needle seals
1. Remove the material needle (
Ä
Chapter 8.5 ‘Changing the fluid needle’ on page 34 ).
Fig. 17: Removing the needle seals
2. Unscrew the clamping screw ( Fig. 17/4) with a box spanner.
3. Remove the slotted ring ( Fig. 17/5) from the clamping screw ( Fig. 17/4).
4. Remove the bracket ( Fig. 17/2) and slotted ring ( Fig. 17/1) from the bracket ( Fig. 17/2).
5. Check the condition of the O-ring ( Fig. 17/3), replace if necessary.
6. Replace the slotted rings ( Fig. 17/1 and 5).
Automatic spray gun RA 5
ENGLISH
200-0319 ■ 200-0321 ■ 200-0323 ■ 200-0324 GB–37