Krautzberger RA 5, Operating Instructions Manual

Page: 20 / 53

6.4.2 Screw-type design
Removing the main elements
Fig. 5: Removing the main elements
1. Loosen the screw ( Fig. 53).
2. Remove the main element ( Fig. 5/1) from the adapter ( Fig. 5/2).
Mounting the main elements
1. Push the main element ( Fig. 5/1) onto the adapter ( Fig. 5/2).
2. Screw on the main element ( Fig. 5/1) and adapter ( Fig. 5/2) with the screw ( Fig. 5/3).
6.5 Nozzle fixing (optional)
Flat jet nozzles can be adjusted to adapt to the workpiece geometry either seamlessly or in 45°
increments.
Fig. 6: Nozzle fixing
Operating instructions
T-Dok-449-GB-Rev.7
mail@krautzberger.com, www.krautzberger.com GB–20