1.
Chapter 7.5 ‘Shutting down’ on page 24
).
2.
If necessary, secure fluid pressure pump or pressurised fluid container for the spray media
against restart.
Fig. 7: Cleaning the hand-held spray gun
3.
Connect a container with detergent to the fluid connection ( Fig. 7/1, 2 or 3) or fill cup with
detergent fluid.
4.
Switch on the compressed air supply.
5.
Where applicable, switch on fluid pressure pump or pressurised fluid container for spray
media.
6.
WARNING!
Sound pressure level
Depending on the operating conditions, the sound pressure of the hand-held spray gun
may cause hearing damage.
Start spraying process by activating the pull lever ( Fig. 7/4).
7.
Spray until the cleaning product runs clear.
8.
End the spraying process by releasing the pull lever ( Fig. 7/4).
Operating instructions
T-Dok-198-GB-Rev.3
[email protected], www.krautzberger.com
GB–28
Summary of Contents for 090-3566
Page 60: ......
