KRAUSMANN 8352, Operation Manual

Page: 13 / 20

13
KRAUSMANN POWER TOOLS 8352
English | EN
Electrical safety
Personal safety
Κeep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
Αvoid body contact with earthed or ground-
ed surfaces wuch as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet
conditions. Water enetring a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan-
gled cords increase the risk of electric shock.
When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord for outdoor use reduces the
risk of electric shock.
Stay alert, watch what you are doing and use
common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of distraction while
operating power tools may result in serious
personal injury.
Use safety equipment. Always wear eye pro-
tection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
Αvoid accidental starting. Ensure the switch
is in the off-position before plugging in.
Carrying power tools with your finger on the
switch or plugging in power tools that have
the switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool ON. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer for
the purpose for which it was designed.
Do not use the power tool if the switch does
not turn it ON and OFF. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing
accessories or storing power tools. Such
preventative safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
M aintain power tools, check for misalign-
ment or binding of moving parts, breakage of
parts and any other condition that may affect
the power tools’ operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
K eep tool sharp and clean. Properly main-
tained tools are less likely to bind and are
ea sier to control.
Use the power tool, accessories and tool bits
etc., in accordance with these instructions
and in the manner intended for the partic-
ular type of power tool, taking into account
the working conditions and the work to be
performed.
Us
e o
f the power tool for operations
different from intended could result in a
hazardous situation.
Power tool use and care
balance at all times. This enables better
control of the power tool in unexpected
situations.
Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught
in moving parts.
Have your power tool serviced by a qualified
repair person using only genuine replace-
Service