Do not use a power source exceeding
the machine’s specified value, only use
220V AC power!
The outlet used for the machine’s
current must be greater than the
machine’s specified value;
otherwise it may lead to
overheating or fire.
When installing or repairing, the machine
must be disconnected from the power
source!
Otherwise it may lead to electric
shock.
Do not damage the power cord or
outlet!
Doing so may lead to electric
shock, short circuiting, or fire.
Do not touch the power plug with wet
hands!
It may lead to electric shock.
Notes
-4-
Do not use the water
purifier when the sewer is blocked up!
If it is used while the sewer is
blocked, it may cause the
waste water to back up or
pollution to get inside the
water purifier.
The waste water discharge
pipe and waste water ratio device cannot
be blocked!
When the waste water discharge pipes and waste
water ratio device are clogged, it may lead to high TDS
effluent, the RO membrane may get blocked or the
water purifier may not work.
Water purifier inlet
water temperature should not exceed
38 !
℃
If the inlet water temperature is over 38 , it will
℃
damage the reverse osmosis membrane leading to
membrane failure.
Do not use in conditions under 5 !
℃
If the temperature in the room is below 5 , please be
℃
sure to take measures to prevent freezing, such as
starting the heater or air conditioner to prevent leakage
or cracked pipes caused from water freezing inside the
machine.
Do not use this water purifier outdoors!
If this water purifier is used
outdoors, it can lead to
accelerated aging of the water
purifier pipes and parts, which
can cause leaking or machine
failure.
Do not use the water
purifier in direct sunlight!
When the water purifier is in
sunlight for a period of time, it may
create a breeding ground for
microorganisms so the water
purifier water quality will decrease,
and they may pollute the internal
components of the water purifier.
