Scissors
1 pair
21mm wrench
1
16mm wrench
1
14mm and 12mm multi wrench
1
Needle nose pliers
1
③
Confirm that you have all the connectivity accessories required for installation
④
Prior to installation turn off the water and/or electricity
2. Instructions for Proper Installation
①
Inlet water metal hose and 3-way inlet water joint
installation method (if the metal hose diameter is
9mm the 3-way inlet water joint must be purchased
separately)
First close the inlet water valve. Unscrew from the
metal hose. Remove the 3-way inlet water joint from
the water purifier accessories box, thread one end of
the inlet water 3-way joint into the inlet water valve
outlet; one end of the newly unscrewed metal hose
should be screwed into the 3-way inlet water joint
screw nut (See Diagram 4).
Diagram 4
②
3-way inlet water joint and inlet water ball valve installation method
Take out the inlet water ball valve from the water purifier accessories box, wrap one end of the ball valve
external threads with the appropriate Teflon tape (See Diagram 5), if you have silica gel, spread a little
on and then screw the ball valve into the corresponding hole of the 3-way inlet water joint (See Diagram
6). Take out the Ø 6mm water pipe from the accessories box, using scissors cut a suitable length of
pipe, connect one end of the pipe with the inlet water ball valve (See Diagram 4), finally screw the nut in
place.
Diagram 5 Diagram 6
③
Goosneck faucet installation
In the counter where the faucet is to be installed drill a φ12mm hole in an appropriate position, then take
out the faucet from the water purifier accessory box. Start the faucet installation: first put the stainless
steel neck on the faucet main body (See Diagram 7), then lower the main part of the faucet into the
already drilled hole, and then put the spacer on the lower part of the faucet. Screw the fixed nut into the
bottom end of the faucet to fix the faucet to the counter, finally put the appropriate length of 6mm pipe
into the water inlet connection, put the 6mm pipe stopper into one end, put on the 6mm nut, screw to the
-13-