Krausen NEW LINE A Installation And User Manual Download Page 3

Safety Considerations

 (Be sure to read and remember these safety considerations

In   order   to   avoid   property   damage   and   harm   to   you   and   others,   make   note   of   the   following   safety
precautions.

Ignoring the following safety precautions could result in a risky situation:

 Warnings 

If you ignore contents in this section, it may cause permanent damage to the

water purifier or cause serious property damage.

 Notes 

If you ignore the contents in this section, it may lead to damage of some parts of the

water purifier or may result in some property damage.

  

Warnings

Do   not   disassemble   or   modify   this
water purifier on your own!

Unauthorised   disassembly   or
modification   of   the   machine
could   lead   to   machine
malfunctions   or   leakage
accidents.

Please check with the store where you purchased
this   product   for   product   consultation   in   order   to
arrange for repairs.

Do   not   put   things   on   the   top   of   the

machine!

Obstructing   the   heat   dissipation
may   lead   to   machine   damage   or
fires

.

Do not put heavy objects on the water
purifier!    

If   heavy   objects   are   placed   on
the water purifier, it may result in
damage   to   the   water   purifier’s
dust   cover   or   internal
components, which could lead to
leakage,   the   machine   working
improperly,   or   even   serious

property damage.

Do not use this water purifier under high
water pressure conditions!

Operating   under   high   pressure
conditions   may   cause   the   water
purifier pipes to rupture, resulting in
leakage,   the   machine   working
improperly,   or   even   serious
property damage.     Recommended

inlet pressure is 0.1MPa to 0.35MPa.

Do not let the machine come in contact
with corrosive materials!

These materials could corrode
the outer cover and affect the
water parts or some toxic and
hazardous   compounds   could
penetrate   the   water   purifier

pipes,   leading   to   contaminated   water   production
and   machine   leakage,   which   could   even   cause
bodily and property damage.

Do not put the water purifier close to the

fire!

Do not put the water purifier near a
fire   source   or   place   where   the
temperature   is   too   high,   this   may
cause deformation or melting of the
machine,   causing   damage   or

leakage,   which   could   lead   to   serious   bodily   and
property damage.

-3-

Summary of Contents for NEW LINE A





















Reviews: