9
Installation Method
This company recommends that professionals install the machine for you, because you must use drills and
other power tools in the installation process. If you are installing it yourself, please refer to the following
steps and diagrams:
1. Pre-Installation Preparations
①
Confirm the location the water purifier will be installed (when installing, it should depend on the actual
circumstances)
②
Confirm the various tools required for installation
Adjustable spanner
1
Drill
1
6.2mm drill bit
1 (waste water hole)
Hole saw,
φ14mm
1 (high-speed steel or marble hole saw)
Phillips and flathead screwdrivers
1 of each
Scissors
1 pair
18-21mm wrench
1
14-16mm wrench
1
Needle nose pliers
1
③
Confirm that you have all the connectivity accessories required for installation
④
Prior to installation turn off the water and/or electricity
2. Instructions for Proper Installation
①
Inlet water metal hose and 3-way inlet water joint installation method (if the metal hose diameter is
3/8
’’ the 3-way inlet water joint must be purchased separately)
First close the inlet water valve. Unscrew from the metal hose. Remove the 3-way inlet water
joint from the water purifier accessories box, thread one end of the inlet water 3-way joint into the
inlet water valve outlet; one end of the newly unscrewed metal hose should be screwed into the
3-way inlet water joint screw nut (See Diagram 4).
