KRAUSE 835086, Assembly And User'S Manual

Page: 70 / 192

70
Article no. Wall anchor type
Total load in kN per anchor bolt in kN
Horizontal
traction
Vertical
Horizontal
traction
Vertical
835239
Wall anchor fixed 200 mm 0.31 1.30 0.31 1.30
835246 Wall anchor standard adjustable189-253 mm 0.34 1.30 0.34 1.30
835192 Wall anchor adjustable 100-150 mm 2.48 1.30 1.24 0.33
835208 Wall anchor adjustable 150-200 mm 3.03 1.30 1.52 0.33
835215 Wall anchor adjustable 200-270 mm 3.66 1.30 1.83 0.33
835222
Wall anchor adjustable 270-400 mm 4.87 1.30 2.44 0.33
835253 Wall anchor adjustable 100-150 size base plate 1.11 1.30 0.56 0.33
835277 Wall anchor adjustable 150-200 size base plate 1.34 1.30 0.67 0.33
835260 Wall anchor adjustable 200-270 size base plate 1.62 1.30 0.81 0.33
835284 Wall anchor adjustable 270-400 size base plate 2.19 1.30 1.10 0.33
838193
835338 Wall anchor fixed 500 mm base plate
Strap
0.00
1.13 1.50
1.03 0.00
1.13 0.33
1.03
838179
835086
Wall anchor fixed U-form 150 mm V4A Screw 0.26 1.50 0.26 1.50
838186
835093
Wall anchor fixed U-form 200 mm V4A Screw 0.30 1.50 0.30 1.50
838155
835109
Wall anchor fixed U-form 150 mm V4A Screw 0.26 1.50 0.26 1.50
838162
835116
Wall anchor fixed V-form 200 mm V4A Screw 0.30 1.50 0.30 1.50
837554
Wall anchor 500-750 mm upper plate
lower plate 3.80
0.00 1.95
4.10 0.95
0.00 0.49
4.10
838254
837561 Wall anchor for support 350–550 mm top
bottom
2.60
0.00 1.50
1.50 2.60
0.00 1.50
1.50
2.3 Withdrawal forces for mounting
Note:
The effect that wall anchor and ladder represent a bend-resistant connection, must
be ensured. Implement the connection at the rail accordingly. Place the wall anchor directly
under a step and tighten the screw that clamps the rail adequately. For aluminum ladders,
tighten the screws only up to the contact of the wall anchor surface. Suitable wall anchors
must be selected depending upon the anchoring materials and correspondingly, the pulling
forces to be received! Only such anchoring means should be used that have been approved
by the site supervision and which can divert the specified loads in the anchoring material.
Please select the appropriate anchoring material in consultation with the manufacturers and
the structural engineers. The wall anchor braces should be attached at a maximum distance
of 2000 mm.
Anchorage forces in kN (design values)
2.2 Category of personnel for use of a fixed ladder system
There are different specifications for installation execution at the rest platforms for trained and
untrained persons. Here is the classification as per DIN 18799-1:
Untrained persons (Category A):
e.g.: Private individuals, caretaker, without experience with arrester
Trained persons (Category B):
e.g. fitters who are trained, have undergone occupational health examination for working at
heights, have received training and evidence thereof is available; and are being instructed re-
gularly with respect to the use of arresters.