8
4. Install Sink
5. Install Plumbing Fixtures
• Connect drain to sink. Connect trap to drain. Connect water supply
connections to faucet according to manufacturer’s instructions
• Run water into sink and check for leaks
NOTE:
Use acetone or rubbing alcohol to remove any excess sealant
immediately after application
• Check the alignment of the sink to the opening in the countertop. Use a
bead of clear silicone (or preferred adhesive) around the underside of the sink
• Carefully insert the sink in place, align, and press firmly
• Allow sealant to set for 30 – 60 minutes
13.4” (340mm)
13.4” (340mm)
Summary of Contents for Natura KSR-9MW
Page 11: ...11...
