6
1. Cut Paper Template
2. Trace Template
• Use scissors to cut along the inside line of the paper template
• Place the cut-out template in the desired location on the countertop and
trace with a pencil
• Mark the faucet hole centerline on the countertop using the vertical line
in the center of the paper template
NOTE: Make sure clearance is suitable for backsplash, faucet, and plumbing for the sink
13.4” (340mm)
13.4” (340mm)
344mm
13.5"
344mm 13.5"
R50mm
R2.0"
Finished Wall
Rim of Lavatory
Model No.
KSR-9MW
Allow a minimum of 4.5” (114.3mm
from wall for faucet placement
clearnace before cutting)
NOTE:
When plotting template full size:
Make sure horizontal and vertical
match the dimensions labeled
in the template
2” (50.8mm Suggested)
2.5” (63.5mm Suggested)
Cut Along This Line
Summary of Contents for Natura KSR-9MW
Page 11: ...11...
