15
of proper exhaust grilles under it to emit exhaust heat from the chamber above the fireplace.
Grilles (decompression ones) are mounted on both sides of the housing on opposite sides, e.g. alter-
nately higher and lower than the decompression shelf. They enable intensive air flow - circulation,
which cools the surface of the ceiling. The size of the grilles - their effective area is not important.
3. Description of the appliance, its construction, technical parameters, options.
Construction of the insert/sections of the NADIA inserts
insert approved for installing a set of accumulation discs
and any water cowl (fi200 mm)
movable, two-piece iron flue gas exhaust with adjusta-
ble setting of 360
o
the body and the front of the insert made of steel
intended for use at elevated temperatures
deflector - extends the exhaust route, combustion is
more environment-friendly
the large combustion chamber lined with Acumotte
hexagonal chamber of the stove affects the purity of
combustion
no-grill insert - afterburning on ash double aeration
system, colours of combustion
built-in inlet connector from the outside fi 125 mm,
with a factory-fitted throttle to regulate air flow
adjusting the air intake with just one regulator, which
excludes errors due to improper use
adjustable feet for levelling the insert
standard inserts are fitted with a single decora-
tive outer glass
the insert door has modern a sliding handle
(optional door closing system)
the possibility of changing the door from the
standard right-side to the left-side opening
Summary of Contents for NADIA 14/P/BS/G
