Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
WP-DEC7
.
RS-232 Configuration
Grounding the
WP-DEC7
(Optional)
RS-232 Control
1.
Connect the ring tongue terminal to the building grounding point wire
(a green-yellow, AWG#18 (0.82mm2) wire, crimped with a proper
hand-tool is recommended).
2.
Insert the M3x8 screw through the toothed lock washer, the tongue
terminal and the washer in the order shown above.
3.
Insert the M3x8 screw (with toothed lock washer ring tongue terminal
and washer) into the grounding screw hole and tighten the screw.
Baud Rate:
115,200
Data Bits:
8
Stop Bits:
1
Parity:
None
Connecting the audio output
To a balanced
stereo audio
acceptor:
To an unbalanced
stereo audio
acceptor:
Connecting an
Unbalanced Stereo
Audio Source to the
Balanced Input
To achieve specified extension distances, use the recommended Kramer cables available at
www.kramerav.com/product/WP-DEC7
Using third-party cables may cause damage!
