#
Feature
Function
7
LAN MEDIA 1G(PoE)
RJ-45 Port
Unicast: connect for streaming either directly to a decoder or via LAN.
Multicast: connect to multiple decoders or connect to one decoder to which multiple decoders
are daisy-chained via SERVICE (1G) port.
WP-DEC7
is powered by PoE (power over ethernet) delivered through the LAN MEDIA port,
unless the optional 20V DC connector is attached.
8
AUDIO OUT 5-pin
Terminal Block Connector
Connect to a balanced analog stereo audio acceptor.
9
20V/1A DC Connector
Connect to the power adapter (optional, purchased separately).
10
LAN SERVICE 1G RJ-45
Port
Used optionally for physical separation between AV and command streams to separate LAN
for security and reliability purposes.
11
Ring Tongue Terminal
Grounding Screw
Connect to grounding wire (optional).
12
RS-232 3-pin Terminal
Block Connector
Connect to an RS-232 device to use as a Gateway and bi-directional serial control signal
extension (even when no AV signal is extended).
Step 3: Install WP-DEC7
Insert the device into the in-wall box (note that first you need to connect the RS-232 and LAN/POE RJ-45 Connector cables
and/or power) and connect the parts as shown in the illustration:
EU/UK Version
US-D Version
DECORA® design frames are included in US-D models.
We recommend that you use any of the following standard 2 Gang in-wall junction boxes (or their equivalent):
•
US-D
: 2 gang US electrical junction boxes.
•
EU
: 2 gang in-wall junction box, with a cut-hole diameter of 2x68mm and depth that can fit in both the device and the connected
cables (DIN 49073).
•
UK
: 2 gang in-wall junction box (BS 4662), 135x75mm (W, H) and depth that can fit in both the device and the connected cables.
•
EU/UK:
2 gang on-wall junction box (use the recommended Kramer on-wall box available at
www.kramerav.com/product/WP-DEC7
