![background image](http://html1.mh-extra.com/html/kramer/wp-501/wp-501_user-manual_2002351007.webp)
WP-501 - Defining the WP-501
5
Figure 2: WP-501 Rear Panel
#
Feature
Function
1
IR OUT
Controls the display device via an IR emitter (for example,
in cases where RS-232 control is not available)
2
VIDEO OUT
Connect to the video IN of the display device
3
AUDIO OUT 2
Connect to he audio input associated with the Video Input
channel of the display device
Identical to the AUDIO OUT 1 port
4
AUDIO OUT 1
Connect to the audio input associated with the PC
graphics Input channel of the display device
Identical to the AUDIO OUT 2 port
5
POWER + 12V DC
Connect to power the unit
6
Ring Tongue Terminal
Grounding Screw
Connect to grounding wire (optional), (see
Sec ion 4.1
7
)
ETHERNET Port
Connect to the local computer network for accessing the
stored Web pages, for remote control and management
from the Kramer Site-CTRL software and for remote
configuration file and firmware updates upload
8
RELAYS
Terminal Blocks
Connect to low-voltage relay-driven devices (from 1 to 2)
9
VGA (PC) OUTPUT
Terminal Blocks
Connect to the PC graphics IN of the display device
10
RS-232
Port
Connect to the RS-232 connector on the display device
11
PC 2 IN
Terminal Blocks
Connect to the PC 2 source (pins ED12 and ED15 pass
the EDID information)
Make sure you use 15-wire VGA cables between the
WP-501 and the PC2 to enable EDID communication
12
AUDIO IN 2 Terminal
Blocks
Connect to the unbalanced stereo audio signal of the PC2
source
13
AUDIO/VIDEO
IN
Terminal
Blocks
VIDEO
Connect to the composite video source
14
LEFT,
RIGHT
Connect to the left and right unbalanced audio source