WP-2UT/R-KIT
Quick Start
P/N: 2 9 0 0 - 3 0 1 4 1 1 QS
Rev: 1
Scan for full manual
WP-2UT/R-KIT Quick Start Guide
This guide helps you install and use your
WP-2UT
/R-KIT
for the first time.
Go to
www.kramerav.com/downloads/WP-2UT/R-KIT
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check
what’s in the box
WP-2UT
USB Transmitter
1
C-USB/AB-6
cable
Installation accessories
1 Bracket set
PT-2UR
USB Receiver
1 Power adapter and cord
Frame set and faceplate
1 Quick start guide
Step 2: Get to know your WP-2UT/R-KIT
WP-2UT
#
Feature
Function
1
USB 2.0 Type B Port
Connect to USB host.
2
LINK LED
Flashes blue when a link is established.
3
ON LED
Lights green when locally powered by the power adapter.
Lights orange when powered by PoC.
4
Ring Tongue Terminal Grounding Screw
Connect to grounding wire (optional).
5
SRV (Tx, Rx)
5-pin Terminal Block
Connector (with a
common G pin)
Connect for firmware upgrade.
6
RS-232 (G, Rx, Tx)
Connect for serial extension (9600 baud rate).
7
Power Supply 2-pin Terminal Block
Connector
Connect to the power supply. Connect GND to GND, +12V to +12V.
8
LINK POC
◄► OUT RJ-45 Connector
Connect to the LINK IN port on the
PT-2UR
and to power either the device
via the receiver or the receiver by the device.
