PT-2UR
WP-2UT
#
Feature
Function
9
LINK LED
Flashes blue when a link is established.
10
AUDIO OUT 3.5mm Mini Jack
Connect to an unbalanced stereo audio acceptor.
11
USB 2 Type A Ports (1 to 4)
Connect to USB devices.
Connect
PT-2UR
directly to the power adapter in order to charge USB
devices.
12
ON LED
Lights green when locally powered by the power adapter. Lights orange
when powered by PoC.
13
LINK IN RJ-45 Connector
Connect to the LINK OUT port on the
WP-2UT
and to power either the
device via the transmitter or the transmitter by the device.
14
PROG (Tx, Rx)
5-pin Terminal Block
Connector (with a
common G pin)
Connect for firmware upgrade.
15
RS-232 (G, Rx, Tx)
Connect for serial extension (9600 baud rate).
16
12V DC Power Connector
Connect to the supplied power adapter.
Step 3: Install the WP-2UT/R-KIT
WP-2UT
Insert the device into the in-wall box (note that first you need to connect the HDBT cable and power) and connect the parts as
shown in the illustrations below:
US-D Version
DECORA® design or similar frames are
included in US-D models. DECORA® is a
registered trademark of Leviton
Manufacturing Co., Inc.
We recommend that you use any of the
following standard 1 Gang in-wall junction
boxes (or their equivalent):
•
US-D
: 1 Gang US electrical
junction boxes.
PT-2UR
Install
PT-2UR
using one of the following methods:
•
Attach the rubber feet and place the unit on a flat surface.
•
Fasten a bracket (included) on each side of the unit and attach it to a flat surface
(see
www.kramerav.com/downloads/PT-2UT/R
•
Mount the unit in a rack using the recommended rack adapter
(see
www.kramerav.com/product/PT-2UT/R
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
•
Maximum mounting height for the device is 2 meters.
