Your WP-210E XGA Line Driver
5
4.3 Your WP-210E Lower Side Panel
Figure 3 and Table 2 define the lower side panel of the
WP-210E
:
Table 2: WP-210E Lower Side Panel
# Feature
Function
1 H (Horizontal)
Sync Switch
2 V (Vertical)
Sync Switch
Set both switches to TTL for
a digital sync source (for
example, a graphics card
from a PC or laptop). Set
both switches to Analog if
the source is analog based,
for example, an RGBHV
source with coaxial cable
for sync, such as a camera
with analog H and V syncs
3 +12V PIN
Connect (+) to the connector
for powering the unit
4 GND PIN
Connect (-) to the Ground
Figure 3: WP-210E Lower Side Panel
4.4 Your RGBHV Outputs
Figure 4 defines the 5 RGBHV BNC output connectors
1
of the
WP-210E
which connect to the pre-installed wiring in the wall box opening that
connects to the XGA acceptor:
Figure 4: WP-210E RGBHV Outputs
1 The WP-210E could be used for component HDTV by connecting YPbPr in place of GBR, and not connecting H and V
