Kramer WP-210E, User Manual

Page: 7 / 14

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your WP-210E XGA Line Driver
4
4.2 Your WP-210E Front Panel
Figure 2 and Table 1 define the front panel of the
WP-210E
:
Figure 2: WP-210E Front Panel
Table 1: WP-210E Front Panel Features
# Feature Function
1 Holes (2) For fastening the wall plate in place
2 XGA INPUT HD15F Connector Connect to the VGA/XGA source
3
LEVEL Potentiometer Adjusts
2
the output signal level for the RGBHV outputs
4 EQ.
1
Potentiometer Adjusts
2
the cable compensation equalization level for the
RGBHV outputs
5 ID BIT Button Selects ID BIT when pushed in (when outputting a VGA signal
from a notebook to an external VGA monitor
3
)
6 TERM. Button
Push in to terminate with 75 , or release for looping
7 XGA LOOP HD15F Connector For VGA/XGA looping to increase output availability
8
ON LED Illuminates when receiving power
1 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals
2 Use a screwdriver to carefully rotate the Potentiometer, adjusting the appropriate level
3 When the ID BIT is ON, the notebook will output to an external VGA monitor