Your WP-209
5
Figure 2: WP-209 Front Panel for the European Version
Table 1: WP-209 Front Panel
#
Feature
Function
1
Holes (4)
For fastening the wall plate in place
2
VIDEO
RCA Connector
1
Connects to the composite/SDI video source
3
ETHERNET
RJ-45
Connector
1
Connect to the ETHERNET
4
LEFT
RCA Connector
1
Connects to the unbalanced left stereo audio source
5
RIGHT
RCA Connector
1
Connects to the unbalanced right stereo audio source
6
LOOP
HD15F Connector
Connect to a local display
7
PC INPUT
2
HD15F Connector
Connect to the computer graphics source
8
PC
INPUT
AUDIO INPUT 3.5mm
Mini Jack
Connects to the unbalanced stereo audio PC source
9
ON
LED
Illuminates when receiving power
1 This connector is a pass through connector
2 Can be used for any RGBHV resolution (for example, VGA, XGA, UXGA and so on). You can connect a component HD
source (for example, a set top box with YPbPr outputs), using a breakout VGA-to-RCA/BNC cable (for example, the Kramer
C-GM/3RVF cable). If you have a VGA to a 5 BNC cable, use the RGB wires only. For direct wiring, the input connector
PINOUT is as follows: PIN 1 for Pr; PIN 2 for Y; and PIN 3 for Pb
