Overview
3
3 Overview
The Kramer
WP-209
wall plate features:
A computer graphics PC INPUT on a standard HD-15 connector
An amplified and equalized RGBHV/UXGA/YPbPr output on an HD-15
connector
An unbalanced stereo AUDIO input on a 3.5mm mini jack with a
corresponding balanced stereo AUDIO output on a 5-pole terminal block
In addition, the
WP-209
wall plate comes with pass through connectors for:
Composite video on an RCA connector
Unbalanced stereo audio on RCA connectors
Ethernet on an RJ-45 connector
In particular, the
WP-209
has:
Trimmer controls for UXGA EQ.
1
, and UXGA Level
Separate trimmer controls for right and left line audio level
Resolution exceeding UXGA, that ensures transparent operation
A standard 12 Volt DC feed
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances and
positioning your
WP-209
away from moisture, excessive sunlight and dust
Caution
– No operator-serviceable parts inside unit.
Warning
– Use only the Kramer Electronics input power
wall adapter that is provided with this unit
2
.
Warning
– Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Cable equalization
2 For example: model number AD2512C, part number 2535-000251
