Operating the VS-88HD
23
23
7.1.10 Indicating Errors
If the front panel buttons were incorrectly pressed, such as pressing two
keys at once, or an invalid setup # was chosen for recall, the following error
indication occurs:
The STO, RCL, LOCK, and TAKE buttons all flash together for
one second and return to their previous state
If an error is indicated, retry the previous action or choose a new action.
7.2
Using Serial Commands
To operate the
VS-88HD
using serial commands, Kramer offers control
software that can do this. You can download free software from the Kramer
Electronics Web site.
For an explanation of all KRAMER 3000 commands, see section
10.2
For an explanation of all KRAMER 2000 commands, see section
12
7.3
Using the Infrared Remote Controller
To operate the
VS-88HD
using the
RC-IR3
infrared remote controller, see
the User Manual packed with the remote controller
1
.
Note
:
The remote control cannot set single or dual mode operation or
change genlock timing. They can only be set from the front panel
The IR remote can only set 8 preset configurations equivalent to
OUT1 to OUT8
1 See also the Kramer Web site:
www.kramerelectronics.com