![background image](http://html1.mh-extra.com/html/kramer/vs-81hd/vs-81hd_user-manual_2001419013.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting Your VS-41HD 4x1 HD/SD-SDI Switcher / DA
10
6.3 Controlling via the RS-485 Port
To cascade up to eight individual
VS-41HD
units, via RS-485 (with control
via a Master Programmable Remote Control system such as the Kramer
RC-3000
), as
Figure 5
illustrates, do the following:
1. Connect the “A” (+) and “B” (-) PINS on the RS-485 terminal block port of
the
RC-3000
to the “A” (+) and “B” (-) PINS, respectively, on each of the
eight
VS-41HD
units. (If using shielded twisted pair cable, the shield is
usually connected to the “G” (Ground) PIN of the first unit).
2. Set the first
VS-41HD
unit as MACHINE # 1 and the following seven
VS-41HD
units as MACHINE # 2 to MACHINE # 8, according to
Table 3
.
MACHINE # 1
MACHINE # 8
KEYBOARD EXTENSION
REMOTE CONTACT
RS-485
RS-232 IN
RS-232 OUT
12 VDC
1 2
1 2 3 4 5 6 7 8 G
4
6
8
10
3
5
7
9
11 12
14
16
OU
T
13
15
IN
R C -3 0 0 0
RS-485 PINOUT
B
A
_
+
Figure 5: Controlling via RS-485 (for example, using an RC-3000)