10
VS-66HDCPxl - Connecting the VS-66HDCPxl
5
Connecting the VS-66HDCPxl
Always switch off the power to each device before connecting it to your
VS-66HDCPxl
. After connecting your
VS-66HDCPxl
, connect its
power and then switch on the power to each device.
To connect the
VS-66HDCPxl
as illustrated in the example in
1. Connect up to six DVI sources (for example, computer graphics sources) to
the IN DVI connectors.
2. Connect the OUT DVI connectors to up to six DVI acceptors (for example,
DVI displays).
3. If required, connect a PC and/or controller to the RS-232 port (see
Section 5.1
4. If required, acquire the EDID (see
) and/or the Ethernet port.
Section 6.4
The power cord is not shown in
i
i
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203