VS-66HDCPxl - Operating the VS-66HDCPxl 6x6 DVI Matrix Switcher
19
4. Press the EDID button.
The process is complete when the display returns to normal.
6.5
Locking and Unlocking the Front Panel
To prevent unintended tampering with the unit via the front panel buttons, lock
your
VS-66HDCPxl
.
To lock the
VS-66HDCPxl:
•
Press the PANEL LOCK button on the front
6.6
Resetting the Ethernet Configuration to Default Values
Power cycle the unit while holding in the Factory Reset button, located on the rear
panel of the unit.
6.7
Controlling Configuration via the Ethernet Port
To control several units via Ethernet, connect the Master unit (Machine # 1)
Ethernet port on your PC. Use your PC to configure the initial settings (see
Section
6.8
Firmware Upgrade
Instructions for upgrading the firmware can be found in the
STC Firmware
Upgrade
document.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203