Kramer Electronics Ltd.
VS-6464DN-EM
– Operating Your Video Matrix Switcher
17
Operating Your Video Matrix
Switcher
This section describes:
•
).
•
Using the selector buttons (see
).
•
).
•
).
•
Locking the Front Panel Buttons
).
Startup Display
After switching on the power, the LCD display shows the following screens in sequence (text
in the LCD Display may vary according to machine settings).
Figure 11: Default Startup Status Display Sequence
The
VS-6464DN-EM
does not have separate output and input buttons. Instead, the front
panel includes a numeric keypad within the Selector Buttons area (see
VS-6464DN-EM 8x8 to 64x64 Modular Multi-Format Managed Digital Matrix Switcher
). This numeric keypad lets you enter both the output and input numbers as well as
various numeric configuration values (see
When the unit is powered-on, the last matrix setup that was used is loaded. Use either the
setup recall (records a stored configuration from a preset, see
) or default setup recall (for quick retrieval of a commonly
used programmable default setup, see
) functions to
retrieve other setups.
Viewing the Display
shows the output-input matrix on the LCD display. The LCD display can show only
13 out of the 64 available matrix combinations at once. To view any of the matrix
combinations use the ◄ or the ► buttons on the front panel to shift the sliding window to the
right or left.
