Kramer Electronics Ltd.
VS-6464DN-EM
– Introduction
6
Defining the VS-6464DN-EM 8x8 to 64x64 Modular
Multi-Format Managed Digital Matrix Switcher
This section defines the front and rear panels of the
VS-6464DN-EM
.
Figure 1: VS-6464DN-EM Front Panel
Buttons 11, 12 and 13 function as the TAKE, MENU and LOCK buttons respectively.
#
Feature
Function
1
Double-function
Selector Buttons
Area
Menu Button
Functions
ESC
Press to exit the current operation.
2
EDID
Press to assign EDID channels.
3
STO
Press to store the current setup in a preset. After
pressing the MENU button, this button lights and is
enabled.
4
ALL
Press to connect an input to all outputs. After pressing
the MENU button, this button lights and is enabled.
5
OFF
Press to turn off an output. After pressing the MENU
button, this button lights and is enabled.
6
RCL
Press to recall a preset. After pressing the MENU
button, this button lights and is enabled.
7
DELAY Press to set the delay between confirming an action
and the execution of the action.
8
ENT
Press to complete the input-output setup when using a
one-digit number instead of two digits. For example, to
enter input 5, you can press either 05 or 5, ENT.
Press to enter the options in a setup menu.
9
IR Receiver
Infrared remote control sensor (for future use).
10 IR LED
Lights yellow when receiving commands from the IR
remote control transmitter (for future use).