Kramer VS-6464DN-EM, User Manual

Page: 27 / 94

Kramer Electronics Ltd.
VS-6464DN-EM
– Using the Configuration Menus
25
2. Press 9 (DELAY) on the numeric keypad (see Figure 2 ).
The output/delay times display is shown.
3. Using the numeric keys, enter the output (in this example, 03).
The following is displayed:
01 02 03 04 05 06 07 08
DLY__ =>out03
4. Using the numeric keys, enter the number of delay units.
5. Press TAKE.
The selected output delay is set. The display reverts to the output/input display.
Setup Menu — 4: store setup XX, Storing the Setup in a Preset
This option stores the current setup in a preset (1 to 60).
To store the current setup in a preset:
1. Press MENU.
The Setup Menu options are displayed.
2. Press 4 (STO) on the numeric keypad (see Figure 2 ).
The following is displayed:
store => __
3. Using the numeric keys, enter the preset (1 to 60) in which to store the current setup.
The following is displayed:
Wait …..
After a few seconds, if the preset is not empty, the following is displayed:
SETUP NOT EMPTY
CONFIRM
The TAKE button flashes.
4. Press TAKE.
The setup is stored in the selected preset for subsequent recall. The display reverts to
the output/input display.
Setup Menu — 6: recall setup XX, Recalling a Preset
This option recalls a stored configuration from a preset (1 to 60).
To recall a stored configuration:
1. Press MENU.
The Setup Menu options are displayed.
2. Press 6 (RCL) on the numeric keypad (see Figure 2 ).
The following is displayed:
recall <= __
3. Using the numeric keys, enter the preset (in this example, 02) to recall.
The following is displayed:
Wait …..