Kramer VS-6464DN-EM, User Manual

Page: 9 / 94

Kramer Electronics Ltd.
VS-6464DN-EM
– Introduction
7
11 TAKE Button Press to confirm actions (see Confirming a Switching
Action on page 19 ).
12 MENU Button Press once to enable the ALL, OFF, STO and RCL
buttons (see
Using the Configuration Menus
on page 22 ).
Press again to enter the configuration menu (see Using
the Config Menu on page 26 ).
When in a Menu, press to cycle through the menu
items.
13 LOCK Button Press and hold for approximately 2 sec to lock/unlock
the front panel buttons (see
Locking the Front Panel
Buttons on page 21 ).
14 BREAKAWAY Button Press to exit a Menu (see Using the Configuration
Menus on page 22 ).
15 DEFAULT SETUP Button Press to recall the default setup (see Recalling the
Default Setup on page 21 ).
16 OUTPUTS/INPUTS
LCD Display
Displays the outputs (upper row) switched to the
selected inputs (lower row), (see
Startup Display
on page 17 ).
Displays user interface messages and menus.
17 Power Supplies Supply power to the device. The unit includes two
power supplies. A third one can be installed.
Figure 2: VS-6464DN-EM Front Panel Numeric Keypad
# Feature Function
18
◄ (Backward)
Press to shift the sliding window to the right (the LCD display only shows 13
cross-points out of a total of 16).
19 1, 2, 3, 4, 5, 6, 7, 8,
9, 0
Numeric keypad, 1 to 0.
20
► (Forward)
Press to shift the sliding window to the left (the LCD display only shows 13
cross-points out of a total of 16).