Kramer Electronics Ltd.
VS-62H
– Principles of Operation
14
EDID Operation
The
VS-62H
) stored on all inputs. This
EDID can be exchanged for either:
•
A custom EDID which is uploaded to one or more inputs using Protocol 3000 commands
).
–OR–
•
The EDID of a display device connected to an output by using either the front panel
), a Protocol 3000 command, or the Web
pages.
The EDID is non-volatile and the last valid EDID is used when the device is powered up.
Step-in Functionality
The
VS-62H
can function as a step-in switcher when connected to a suitable HDMI
transmitter, (for example, the
SID-X3N
or the
DIP-31
), using the correct HDMI cable with HEC
support.
Controlling a Remote Transmitter
) to assign remote
device button actions. The default button actions are shown in the following table. Up to three
buttons can be active at the same time.
Command Action
Echo
Allows a connected controller to be
programmed to perform a variety of tasks
triggered by the user buttons, such as, room
control, (lights, screen, and so on)
Out1
Step in current input to Output 1
Out2
Step in current input to Output 2