Kramer VS-62H, User Manual

Page: 17 / 51

Kramer Electronics Ltd.
VS-62H
– Operating the VS-62H 6x2 HDMI Matrix Switcher
15
Operating the VS-62H 6x2 HDMI
Matrix Switcher
This section describes operating the VS-62H and consists of:
•
Switching an Input to an Output on page 15 .
•
Acquiring an EDID from an Output on page 15 .
•
Muting and Unmuting the Outputs on page 16 .
•
Locking and Unlocking the Front Panel Buttons on page 16 .
•
Generating a Test Pattern on page 17 .
Switching an Input to an Output
To switch an input to an output, (for example, Input 5 to Output 2) :
•
Press the Input 5 button in the bottom Output (To OUT 2) row.
The LED lights red and Input 5 is switched to Output 2
Acquiring an EDID from an Output
You can acquire the EDID from OUT 1 or OUT 2 and copy it to any or all of the six inputs to
be stored in non-volatile memory. You can also reset any or all of the inputs to the default
EDID.
To copy the EDID from an Output to one or more Inputs :
1. Press the EDID button to enter the EDID setting mode.
The EDID button lights.
Note : If there is no button activity for 10 seconds, the device automatically exits the EDID
setting mode to normal operation, the EDID button no longer lights and any changes made
are lost.
2. From the To OUT 1 (top) row, press each of the Inputs to which you want to copy the
EDID from Output 1.
Each selected Input LED lights.
3. From the To OUT 2 (bottom) row, press each of the Inputs into which you want to copy
the EDID from Output 2.
Each selected Input LED lights.
4. Press the EDID button.
The button no longer lights and the EDID changes are saved.