KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-4x4YCxl
16
In the AT ONCE mode, you save time as execution is immediate and actions
require no user confirmation. However, no protection is offered against
changing an action in error.
In the CONFIRM mode:
You can key-in several actions and then confirm them by pressing the
“ TAKE” button, to simultaneously activate the multiple switches
Every action requires user confirmation, protecting against erroneous
switching
Execution is delayed
1
until the user confirms the action
7.4.1
Toggling between the AT ONCE and CONFIRM Modes
To toggle between the AT ONCE and CONFIRM modes, do the following:
1. Press the dim TAKE button to toggle from the AT ONCE mode (in
which the TAKE button is dim) to the CONFIRM mode (in which the
TAKE button illuminates).
Actions now require user confirmation and the TAKE button
illuminates.
2. Press the illuminated TAKE button to toggle from the CONFIRM mode
back to the AT ONCE mode.
Actions no longer require user confirmation and the TAKE button no
longer illuminates.
7.4.2
Confirming a Switching Action
To confirm a switching action (in CONFIRM mode), do the following:
1. Press an
OUT-IN combination.
The corresponding Audio and Video 7-segment
Displays blink. The
TAKE button also blinks.
2. Press the blinking TAKE button to confirm the action.
The corresponding Audio and Video 7-segment
Displays no longer
blink. The TAKE button illuminates.
To confirm several actions (in CONFIRM mode), do the following:
1. Press each
OUT-IN combination in sequence.
The corresponding Audio and Video 7-segment
Display blinks. The
TAKE button also blinks.
1 Failure to press the TAKE button within one minute (the Timeout) will abort the action