Kramer Electronics Ltd.
VS-44H2A
– Protocol 3000
40
Function
Description
Syntax
Parameters/Attributes
Example
HDCP-MOD
Set HDCP mode.
Set HDCP working
mode on the device input:
HDCP supported -
HDCP_ON [default].
HDCP not supported -
HDCP OFF.
HDCP support changes
following detected sink -
MIRROR OUTPUT.
When you define
3
as the
mode, the HDCP status is
defined according to the
connected output in the
following priority: OUT 1,
OUT 2. If the connected
display on OUT 2 supports
HDCP, but OUT 1 does
not, then HDCP is defined
as not supported. If OUT 1
is not connected, then
HDCP is defined by OUT
2.
COMMAND
#HDCP-MOD
in_index
,
mode
<CR>
FEEDBACK
~nn@HDCP-MOD
in_index
,
mode
<CR><LF>
in_index
– Number that indicates the
specific input: 1-4
mode
– HDCP mode:
0
– HDCP Off
3
– HDCP defined according to the
connected output
Set the input HDCP-MODE of
IN 1 to Off:
#HDCP-MOD
1
,
0
<CR>
HDCP-MOD?
Get HDCP mode.
Set HDCP working
mode on the device input:
HDCP supported -
HDCP_ON [default].
HDCP not supported -
HDCP OFF.
HDCP support changes
following detected sink -
MIRROR OUTPUT.
COMMAND
#HDCP-MOD?
in_index
<CR>
FEEDBACK
~nn@HDCP-MOD
in_index
,
mode
<CR><LF>
in_index
– Number that indicates the
specific input: 1-4
mode
– HDCP mode:
0
– HDCP Off
3
– HDCP defined according to the
connected output
Get the input HDCP-MODE of
IN 1 HDMI:
#HDCP-MOD?
1
<CR>
HDCP-STAT?
Get HDCP signal status.
io_mode =1
– get the
HDCP signal status of the
sink device connected to
the specified output.
io_mode =0
– get the
HDCP signal status of the
source device connected
to the specified input.
COMMAND
#HDCP-STAT?
io_mode
,
in_index
<CR>
FEEDBACK
~nn@HDCP-STAT
io_mode
,
in_index
,
status
<CR><LF>
io_mode
– Input/Output
0
– Input
1
– Output
in_index
– Number that indicates the
specific input: 1-4
status
– Signal encryption status -
valid values On/Off
0
– HDCP Off
1
– HDCP On
Get the output HDCP-STATUS
of IN 1:
#HDCP-STAT?
0
,
1
<CR>
HELP
Get command list or help
for specific command.
COMMAND
#HELP
<CR>
#HELP
cmd_name
<CR>
FEEDBACK
1. Multi-line:
~nn@Device
cmd_name
,
cmd_name…
<CR><LF>
To get help for command use: HELP (COMMAND_NAME)
<CR><LF>
~nn@HELP
cmd_name:
<CR><LF>
description
<CR><LF>
USAGE:usage
<CR><LF>
cmd_name
– Name of a specific
command
Get the command list:
#HELP
<CR>
To get help for
AV-SW-TIMEOUT:
HELP
av-sw-timeout
<CR>
INFO-IO?
LEGACY COMMAND.
Get in/out count.
COMMAND
#INFO-IO?
<CR>
FEEDBACK
~nn@INFO-IO
IN
in_count
,
OU
T
out_count
<CR><LF>
in_count
– Number of inputs in the
unit
out_count
– Number of outputs in the
unit
Get inputs count:
#INFO-IO?
<CR>
INFO-PRST?
LEGACY COMMAND.
Get maximum preset
count.
In most units, video
and audio presets with the
same number are stored
and recalled together by
commands #
PRST-STO
and
#PRST-RCL.
COMMAND
#INFO-PRST?
<CR>
FEEDBACK
~nn@INFO-PRST
vid
video_preset_count
,
aud
audio_preset_count
<CR><LF>
video_preset_count
– Maximum
number of video presets in the unit
audio_preset_count
– Maximum
number of audio presets in the unit
Get number of video and audio
presets:
#INFO-PRST?
<CR>
DRAFT