Connecting the VS-311H Automatic HDMI / Audio Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
8
5 Connecting the VS-311H Automatic HDMI / Audio Switcher
To connect
1
the
VS-311H
Automatic HDMI / Audio Switcher
, as illustrated in
the example in
Figure 2
, do the following
2
1. Connect an HDMI source (for example, an HDMI DVD player
:
3
) to the
IN 1 HDMI connector and connect the digital audio input
4
2. Connect an HDMI source (for example, an HDMI set top box source) to
the IN 3 HDMI connector and connect the digital audio input
to the IN 1
S/PDIF RCA connector.
5
3. Connect the OUT HDMI connector to the HDMI acceptor (for example,
an HDMI plasma display).
to the IN
3 3.5 mini-jack connector.
4. Connect the AUDIO OUT S/PDIF RCA connector
6
5. Set the PRIORITY SETUP DIP-switches (see section
and the AUDIO
OUT 3.5 mini-jack connector to a digital audio acceptor (for example,
an AV receiver).
5.1
)
6. If required, connect a PC and/or controller to the RS-232 port (see
section
5.3
) and/or the ETHERNET port (see section
5.4
).
7. If required, connect
7
the contact closure remote control PINs (see section
5.2
).
8. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 2
).
1 You do not need to connect all the inputs
2 Switch OFF the power on each device before connecting it to your VS-311H After connecting your VS-311H, switch on its
power and then switch on the power on each device
3 You can also connect a DVD player with a DVD connector, using an DVI-HDMI adapter to transfer video signals
4 Alternatively you can connect it to the 3 5 mini-jack connector
5 Alternatively you can connect it to the S/PDIF RCA connector
6 If the inputs are connected only to the 3 5 mini-jack connectors, connect the AUDIO OUT 3 5 mini-jack connector and/or
the BALANCED OUT
terminal block connector only
7 The connection is not illustrated in
Figure 2