6
VS-21H-IR - Connecting the VS-21H-IR
4
Connecting the VS-21H-IR
Always switch off the power to each device before connecting it to your
VS-21H-IR
. After connecting your
VS-21H-IR
, connect its power and
then switch on the power to each device.
To connect the
VS-21H-IR
as illustrated in the example in
Figure 2
:
1. Connect up to two HDMI sources to the INPUT connectors, using the Kramer
HDMI cables: INPUT 1 connector to HDMI source 1 (for example, DVD Player
1) and INPUT 2 connector to HDMI source 2 (for example, DVD Player 2).
2. Connect the OUTPUT connector to the HDMI acceptor (for example, a
plasma display), using the Kramer HDMI cable.
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. Press the SELECT button (or press key 1 or 2 on the remote transmitter,
once setup (see
Section
4.1
)) to choose which HDMI input to route to the
output. The SELECT button toggles between INPUT 1
and INPUT 2, lighting
the IN 1 LED when INPUT 1 is selected, or the IN 2
LED when IN 2 is
selected.
Figure 2: Connecting the VS-21H-IR
2x1 HDMI Switcher
i
Summary of Contents for VS-21H-IR
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL VS 21H IR 2x1 HDMI Switcher P N 2900 000671 Rev 6...
Page 2: ......
Page 15: ......
