VS-21H-IR - Connecting the VS-21H-IR
7
4.1
Using the Remote Control Transmitter
You can use the remote control transmitter to switch INPUT 1 or 2 to the output.
Before doing so, set it to work with the
VS-21H-IR
by assigning a GROUP number.
The setup parameters for the remote control transmitter are as follows: router number = 1
(default); group number = 11, single digit mode (default), video (default). For further details,
see the RC-IR3 user manual
To assign the GROUP number on the remote control transmitter, do the following:
1. Point the remote control transmitter at the remote receiver (item 10 in
Figure
1
) and press the GROUP key.
2. Press key 11.
This sets and saves the group number.
To switch INPUT 1 or 2 to the output via the remote control transmitter, press key
1 or 2.
Summary of Contents for VS-21H-IR
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL VS 21H IR 2x1 HDMI Switcher P N 2900 000671 Rev 6...
Page 2: ......
Page 15: ......
