#
Feature
Function
11
INPUT 1 HDMI
Connector
Connects to HDMI source 1
12
INPUT 1 AUDIO
3.5mm Connector
Connects to unbalanced stereo audio source 1
13
INPUT 2 HDMI
Connector
Connects to HDMI source 2
14
INPUT 2 AUDIO
3.5mm Connector
Connects to unbalanced stereo audio source 2
15
HDMI OUT
Connector
Connects to an HDMI acceptor
16
AUDIO OUT
Terminal Block
Connects to a balanced stereo audio acceptor
17
INPUT SELECT
Contact Closure Terminal
Block
Connects to external contact closure switches
18
RS-232
Terminal Block
Connects to an RS-232 source
19
MODE/PRESET
DIP-Switches
Use to set EDID, audio and delay settings (see Step 6)
20
5V DC
Connector
Connects to a power supply for the unit
Step 3: Mount VS-211UHD
Install
VS-211UHD
using one of the following methods:
•
Attach the rubber feet and place the unit on a flat surface.
•
Fasten a bracket (included) on each side of the unit and attach it to a flat surface
www.kramerav.com/downloads/VS-211UHD
•
Mount the unit in a rack using the recommended rack adapter (see
www.kramerav.com/product/VS-211UHD
•
Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
•
Maximum mounting height for the device is 2 meters.
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
VS-211UHD
.
To achieve specified extension distances, use the recommended Kramer cables available at
www.kramerav.com/product/VS-211UHD
Using third-party cables may cause damage!